DNA/RNA UV-cleaner box UVT-S-AR is designed for clean operations with DNA samples. UV-cleaner box provide protection against contamination.
Model is a bench-top type, made of metal framework, glass walls, working surface made of stainless steel.
This product is no longer in stock
The working surface of this UV-cleaner box is made of stainless steel and the walls are made of glass to avoid UV cracking. It is equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.
UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the box during operation. They are recommended for operations with DNA/RNA amplicons.
Rear : stainless steel
Sides and front : glass (EUROGLASS, Germany)
|Working surface material||Stainless steel|
|Open UV-lamp||2 x 30W built‑in bactericidal, TUV30WG13 UV-C|
|UV radiation level||15 mW / cm2 / s|
|Radiation type||UV (λ = 253.7 nm), ozone-free|
|Digital time setting of direct UV exposure||1 min–24 hrs / non–stop (increment 1 min)|
|UV-recirculator||1 х 30W (efficiency >99% per 1 hour)|
|Daylight lamp (for working area illumination)||1 x TLD-30W|
|Thickness of side panels||4 mm|
|Thickness of upper front panel||8 mm|
|Thickness of screen||5 mm|
|UV protection||>96%, UV-protection film|
|Working area||1200 × 520 mm|
|Safety features||Automatic open UV-lamp switch off when screen is open|
|Power outlets inside the unit||3 built-in sockets max. 1000 W|
|Nominal operating voltage||100-240 V, 50/60Hz|
|Power consumption||135 W|
|Overall dimensions (W × D × H)||124.5 × 58.5 × 58.5 cm|